Ford Mustang Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter #1
looking for pics of foxbody with narrowed rearend with stock wheel tubs running a 15x10 with 275s on it
thinking of narrowing mine 2.5 per side and running 15x10s with 4in back spacing. i currently have 15x10s with 6.5in back spacing
just trying to get the right look
thanks corral
 

·
Registered
Joined
·
1,058 Posts
Here is mine. I have a 9in rear that I narrowed. I am not sure how much that would be compared to the stock 8.8. If you could give me the width of your rear I could figure out how much you would take off to be where I am. I am running 3.875 backspacing on my wheels. I only have about 1/4" between the wheel well and sidewall though.




 

·
Registered
Joined
·
1,058 Posts
Oh and I am running 295/50's. And the rear has been lowered a bit since I took these pix.
 

·
Registered
Joined
·
1,528 Posts
I know this thread is 10mo old but here a fox 8.8, narrowed 1.5" per side. 15×8 4.5" B.S., Hoosier QTP 27×11.5×15.
KIMG1587.jpg
 
1 - 6 of 6 Posts
Top