Ford Mustang Forums banner

1 - 20 of 79 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter #1 (Edited)
I promise to send $25 to the closest guess
REAR WHEEL HORSEPOWER) via PayPal once I get it on the dyno.
- if I make any changes (or you need more info) before testing I’ll update /edit this post so you can change number.
C53A3A91-F125-4DB8-9F69-9084FEA5A89B.jpeg


-306
-GT-40 tubular upper
-Lower ported by Matt Moss for 1250 gasket (1.20x2.0)
-Eddlebrock preformer aluminum heads with 1.6x2.02 valves
-forged flat top pistons @ 9.25/1
-Cam is
In . 571 lift 222
Ex. 565. 232
115* +3*
(installed at 112 centerline )
-1.6 roller rockers
-Vortech V3-si (HO kit 3.33 pulley)
-4” intake
-90mm pro m mass air meter.
-60 lbs injectors
-Only Engine accessories are alternator and water pump
-Electric fans
-12 hoses from both valve covers to vented catch can.
-1 5/8” JBA shorty headers
-2.75” mandrel bent exhaust with h pipe all the way over axle out back
- pro m efi system
-tko 600
 

·
Registered
Joined
·
1,117 Posts
Clean looking setup.

No Intercooler or meth with a 3.33 pulley?
E85?
 

·
Registered
Joined
·
127 Posts
Discussion Starter #3
no inner cooler
Pump gas

I do have provisions for methanol injection further down the road.
 

·
Premium Member
Joined
·
2,597 Posts
376 RWHP
 

·
Registered
Joined
·
5,232 Posts
I think Saleen414 is close. So I'm going guess a little higher and give him a tribute - 414 rwhp.
 

·
Registered
Joined
·
1,117 Posts
no inner cooler
Pump gas

I do have provisions for methanol injection further down the road.
Without the intercooler you will be limited.

I’m saying 402whp
 
  • Like
Reactions: Foot Hill

·
Registered
Joined
·
75 Posts
405 rwhp
 
  • Like
Reactions: Foot Hill

·
Registered
Joined
·
1,749 Posts
412rwhp

Sent from my Moto E (4) Plus using Tapatalk
 

·
Registered
Joined
·
8,561 Posts
400 rwHP even
 
  • Like
Reactions: Foot Hill

·
Registered
Joined
·
91 Posts
406!
 
1 - 20 of 79 Posts
Top