[Eyt]

Well I got the thing to fire but Im not sure about my settings. Here is what I've selected.
Fuel teeth 8, Spark teeth 1, Ign range 1, Crank alt fire, Ign +1/4
Thinking that eng cycle = 1 rev should be selected

Sync early, Crank sync skip, Sync teeth 1, Sync err/s 3

Crank falling edge, Cam falling edge

Sync cam count

I've read a ton but have very little confidence in what Im doing but at least there is no smoke.

 

[Eyt]

well it runs, wasnt ready for it but here the settings i used

sync cam count
fuel teeth 8, spark teeth 1, ign range .50 teeth, tooth time 50ms
mx sync test 8, sync teeth 1, sync eer r/s 3
crank falling, cam falling
everything else off or 0
tooth control table 0-7 set to 5, 8 set to 3

having a little trouble syncing the actual timing to the computer but need to get coolant system hooked back up first