Ford Mustang Forums banner

21 - 40 of 64 Posts

·
Registered
Joined
·
1,021 Posts
Discussion Starter #21
look whos Cracking now lol

Jesus Christ! the amount of jealous/have not MDS dartard fanboy moron trolls in this hobby is really just amazing :rofl:
Only some kind of troll :leghump: looser in his moms basement would be/get all bent/pissy about what others spend there money on
Maybe its because dartards spent all there life savings/kids college fund buying an over priced brittle/cracking dart block? :confused:

HEY! why dont you take a CRACK! at the Simple Question so many guys have asked since 2006 about your SUPERIOR brittle fart blocks ...

"WHY are there so many complaints of BUSTED/CRACKED DART BLOCKS online ???...

FACT... www.cncblockne.com CNC Blocks NE and Carl Hinkson ... that spamed and was banned from some forums for his Bigot/Racist/Islamist lying BS, NEVER brinell tested Kevins/Troys MAXX block and thats a FACT. The brittle DART blocks the Bigot/Racist Carl Hinkson and his Bigot/Racist/Islamist YellowBullshat internet forum Dart Dealers, like (#2,#3 fanboys PuRpS & SGracing) buddys push on online to everyone have had way more issues/the same cracking issues as the Brittle Cracked Liberty Bell.

FACT... is some of these Bigot/Racist/Islamist (hiding behind america#1) internet forum DART DEALER trolls (and there Bigot/Racist/Islamist internet forum YB ******* Dart fanboy trolls) have continualy Bashed and FALSELY BLAMED other companys products that they dont sell or have instead of dealing with the many online complaints of problems with the Dart Blocks Cracking since 2006 which
NO YB internet dart dealer/peddler troll has ever explained as to why so many Dart Blocks Crack.

here's just one example (post #81) ... of dozens of cracking Dart blocks in the same spot... https://www.yellowbullet.com/forum/showthread.php?p=20529242#post20529242 ...

("I also have at least 12 racers that have broke their dart blocks as I have and the problem is the block. Burning a plug and blowers blowing up I'm sure don't help but from all that has come forward to say their blocks have broke in the same spot leads me to believe the block is failing.")

Lyle671's Dart block ...https://www.yellowbullet.com/forum/showthread.php?t=770506





nos stroker's Dart block...https://www.yellowbullet.com/forum/showthread.php?t=465317



and Just a few more CRACKED DART BLOCK links...




cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=27836506&postcount=123
cracked dart...
https://www.yellowbullet.com/forum/showthread.php?t=1096170
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=20441242&postcount=14
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=1370489
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=44178754&postcount=21
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=1469234
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=3730325&postcount=10
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=770506
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=26057850&postcount=3
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=356696
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=26054754&postcount=122
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=465317
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=20571458&postcount=84
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=455927
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=39247522&postcount=12
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=257285
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=20575866&postcount=85
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=424438
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=20618090&postcount=100
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=816178
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=70126925&postcount=18
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=476057

main break/cracking issues even with the Aluminum Dart Blocks...


Etextor's BBC DART ALUMINUM BLOCK CRACKED - Yellow Bullet Forums







Insane's Cracked Dart Block...https://www.yellowbullet.com/forum/showthread.php?t=623577







..> Cracked dart blocks, Cracked dart blocks, Cracked dart blocks, Cracked dart blocks <..



also find it more than moronic for some with there "China Junk" cast k1tech, scat, eagle, callies, rpm, manley, lunati, cat, molnar, wiseco, ohiocrank cranks & rods

typing on there China made computers&ipods bashing/crying about other american companys products like the 351w maxx block
when the factory Chevy LS blocks that are so popular with the 7sec $200 junkyard LS crowd were Cast in fricking... MEXICO. LOL

and lets not even mention all the other offshore Asian parts from...
weiand, msd, mrgasket, bbm, fordracing, flotek, patriot, srp, holley, compcams, profproducts, rhs, felpro, arrow, afd and many others EH"

oh and BTW (Maxx.Derangement.Syndrome) Dartard, i Only spend MY MONEY with :salute::salute::salute: companys
 

·
Registered
Joined
·
1,021 Posts
Discussion Starter #22
451C - 461C ... 7.4L - 7.5L

seen some very interesting dyno testing done with 4V/Boss port intakes on bigger ci engs that i thought would be relevent to the big ci

451/461 CLEVOR engs...

> FE Intake Adapter < ... & ... > Dyno Mule to Test 351C Intakes on the Intake Adapter, Carb and EFI <






interesting how good the old 4V Weiand Tunnel Ram still is with its 2.360" X 1.630" (3.8"c/s) 4V/Boss intake port size...

> https://www.speedwaymotors.com/Weia...Manifold-351-Cleveland-V8-4V-Head,142546.html <

the old 4V Offy Tunnel Ram didint do so good, Offy gimmicks are nfg, the pendulum divider plates Must Be Cut Out.
 

Attachments

·
Premium Member
Joined
·
2,802 Posts
Still beating that drum on posts from 5-15 years ago. Very relevant. Would you like me to post links to every broken Boss block that ever was. Do you really want to go there? I would bury you with facts. Be careful what you wish for. Karma is a wicked mistress.
 

·
Registered
Joined
·
1,021 Posts
Discussion Starter #24
crack! crack! crack!

its hilarious that dart trolls need to bitch, cry, moan & groan about there precious dart blocks in Every NON fart block thread ... :rofl:




... a friendly reminder dartards ... this is a MAXX BLOCK thread ... please move on ;)

 

Attachments

·
Registered
Joined
·
1,021 Posts
Discussion Starter #25

Attachments

·
Registered
Joined
·
2,312 Posts
LOL I'm so tired of seeing those same pics.. I forget the name, but are you the same dude bumping those pics day after day??

There's a lot of ******** that run their junk ragged. There's a reason most speed parts don't have warranty.

But you're saying this is a Aussie company?
 

·
Registered
Joined
·
1,021 Posts
Discussion Starter #29 (Edited)
LOL I'm so tired of seeing those same pics.. I forget the name, but are you the same dude bumping those pics day after day??
There's a lot of ******** that run their junk ragged. There's a reason most speed parts don't have warranty.
But you're saying this is a Aussie company?
i never get tired of looking at all those over priced CRACKED DART BLOCK Pics LOL, im also not interested in using all new parts in some old/antique POS hillbilly/******* block that will eventually crack with high HP, lastly there original name "Speedmaster79" has been in business since 1979, "procomp" is a secondary Newer name which is also located in California, >speedmaster/procomp< is a 15 million dollar annual company (the Amazon of auto parts), the multi million dollar owner is a Macedonian Slav/Aussie (not chinese) that employs/keeps Americans working in America, been lots of >Lying BS< started by some stupid jealous butthurt aussies about SM/PC, although QC has been an issue with sm/pc!

also the iron SM/PC Maxx Block Copy was originaly made by American companys > RPM/FPS < back in 2006 and now has been taken over by SpeedMaster/ProComp, the blocks design has been out now for over a decade. FPS has built hundreds making 1200+hp up too 1900+hp.
 
  • Like
Reactions: kjb302ho

·
Premium Member
Joined
·
1,131 Posts
Hey Boss douche, enough with the name calling and keyboard toughguy stuff. We can have a adult debate without disrespecting people you don’t know. Enough man, let’s keep it respectful.

I didn’t really read this thread because this Boss dude aggravates me. Don’t know why, but... Are you trying to tell us to buy speedmaster over Dart? WTF is going on here? Show us some data on the longevity and performance of your golden blocks. They might be a solid piece and I would be interested in anything that is solid and reliable. But your delivery on this is all wrong.
 

·
Registered
Joined
·
2,312 Posts
It's Kaboom from Yellow Bullet..

He was bumping that thread for months.. LOL

It's cool tho.. I'm not convinced that Dart is putting out an inferior product. I trust my builder. But it's good to have other options in the marketplace to fit a budget!
 

·
Premium Member
Joined
·
1,131 Posts
WTF is a kaboom?? Basically this is a joke or something right? Well that’s good to hear!
 

·
Registered
Joined
·
1,021 Posts
Discussion Starter #34
before you 2 rocket scientist's start spouting off like some of the other dartard morons...

read this... post #43 > https://www.yellowbullet.com/forum/showthread.php?p=69621833#post69621833 <

The Absolute FACT is, i never started any of this stupidity with some of these brainwashed bigot/islamic dartard clowns that continualy
spam up Every NON fart block thread on forums because they cant handle a single bad word said about there precious cracking fart blocks
getting runs up there pantyhoses & crapping themselfs if anyone has anything good to say about ANY! other block products on the net

... so i wonder what you 2 ("douches") would do if your familys lives were threatened for Not buying dart blocks?
 

·
Premium Member
Joined
·
2,802 Posts
All that is on that link to Yellowbullet is the same old rehashed pics that have been shown over and over and over again. Nothing new. It is the only card the guy can play.
 

·
Premium Member
Joined
·
1,131 Posts
Ok I don’t have a single clue what is going on here, but I did read post number 43. Now I’m even more confused. Boss, that really happened? How did it escalate to that?
And for the record I don’t even own a Dart. I run a ford production 351 block.
 

·
Registered
Joined
·
1,021 Posts
Discussion Starter #39
Ok I don’t have a single clue what is going on here, but I did read post number 43. Now I’m even more confused.
Boss, that really happened? How did it escalate to that?
And for the record I don’t even own a Dart. I run a ford production 351 block.


YES... "that really happened", I was orignaly > Baited/Trolled/Bashed/Doxed/Threatened < by the biggest lying YB internet forum #1 dart dealer troll salesmen Carl Hinkson/CNC Blocks NE www.cncblockne.com and his uneducated inbred YellowBullshat Internet Forum Dart Dealer salesmen/YB dartard Trolls because i would NOT/did NOT buy Dart blocks from a any of these brainwashed ANTIFA type YB forum morons continualy/repeatedly PMing/EMailing me many times over online Pushing me to buy Dart blocks online from them.

these YB dartard morons started BASHING/LYING about the MAXX block being soft and piles of cracked MAXX blocks all over the place ...
... so I did some online shearching and GUESS! WHAT I FOUND OUT! :rofl::rofl::rofl:

turns out it was ALL PILES OF CRACKED FART BLOCKS! ... so I ASKED ... if Fart blocks are so superior to everything else ... WHY are there so many complaints of Cracked/Busted Dart Blocks on YB ... and the Fartard Morons went Full Apeshat off the rails dartardo when I ASKED/MADE my most famous/epic cracked dart block post hundreds of times over and over now for the last few years ... that ... believe it or not ...

... :rofl::rofl::rofl:!!!NO YB INTERNET FORUM DART DEALER AS EVER ANSWERED YET!!!:rofl::rofl::rofl: ...

INSTEAD these dartardo clowns just keep bashing other companys products like the Maxx/World/Boss blocks instead of answering my...

VERY SIMPLE QUESTION ...

"WHY are there so many complaints of BUSTED/CRACKED DART BLOCKS online ???...

FACT... www.cncblockne.com CNC Blocks NE and Carl Hinkson ... that spamed and was banned from some forums for his Bigot/Racist/Islamist lying BS, NEVER brinell tested Kevins/Troys MAXX block and thats a FACT. The brittle DART blocks the Bigot/Racist Carl Hinkson and his Bigot/Racist/Islamist YellowBullshat internet forum Dart Dealers, like (#2,#3 fanboys PuRpS & SGracing) buddys push on online to everyone have had way more issues/the same cracking issues as the Brittle Cracked Liberty Bell.

FACT... is some of these Bigot/Racist/Islamist (hiding behind america#1) internet forum DART DEALER trolls (and there Bigot/Racist/Islamist internet forum YB ******* Dart fanboy trolls) have continualy Bashed and FALSELY BLAMED other companys products that they dont sell or have instead of dealing with the many online complaints of problems with the Dart Blocks Cracking since 2006 which ... NO YB internet dart dealer/peddler troll has ever explained as to why so many Dart Blocks Crack.

here's just one example (post #81) ... of dozens of cracking Dart blocks in the same spot... https://www.yellowbullet.com/forum/showthread.php?p=20529242#post20529242 ...

("I also have at least 12 racers that have broke their dart blocks as I have and the problem is the block. Burning a plug and blowers blowing up I'm sure don't help but from all that has come forward to say their blocks have broke in the same spot leads me to believe the block is failing.")

Lyle671's Dart block ...https://www.yellowbullet.com/forum/showthread.php?t=770506





nos stroker's Dart block...https://www.yellowbullet.com/forum/showthread.php?t=465317



and Just a few more CRACKED DART BLOCK links...




cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=27836506&postcount=123
cracked dart...
https://www.yellowbullet.com/forum/showthread.php?t=1096170
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=20441242&postcount=14
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=1370489
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=44178754&postcount=21
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=1469234
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=3730325&postcount=10
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=770506
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=26057850&postcount=3
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=356696
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=26054754&postcount=122
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=465317
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=20571458&postcount=84
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=455927
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=39247522&postcount=12
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=257285
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=20575866&postcount=85
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=424438
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=20618090&postcount=100
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=816178
cracked dart
https://www.yellowbullet.com/forum/showpost.php?p=70126925&postcount=18
cracked dart
https://www.yellowbullet.com/forum/showthread.php?t=476057

main break/cracking issues even with the Aluminum Dart Blocks...


Etextor's BBC DART ALUMINUM BLOCK CRACKED - Yellow Bullet Forums







Insane's Cracked Dart Block...https://www.yellowbullet.com/forum/showthread.php?t=623577







..> Cracked dart blocks, Cracked dart blocks, Cracked dart blocks, Cracked dart blocks <..



also find it more than moronic for some with there "China Junk" cast k1tech, scat, eagle, callies, rpm, manley, lunati, cat, molnar, wiseco, ohiocrank cranks & rods

typing on there China made computers&ipods bashing/crying about other american companys products like the 351w maxx block
when the factory Chevy LS blocks that are so popular with the 7sec $200 junkyard LS crowd were Cast in fricking... MEXICO. LOL

and lets not even mention all the other offshore Asian parts from...
weiand, msd, mrgasket, bbm, fordracing, flotek, patriot, srp, holley, compcams, profproducts, rhs, felpro, arrow, afd and many others EH"
 

·
Premium Member
Joined
·
1,131 Posts
Well holy crap man! This has been going on since 2012? While I’m not going to get involved in the great debate, I do want to know if you still have this maxx block and if it’s holding up? Is it N/A or boosted? If they don’t like the product, then that’s fine. There’s nothing wrong with different product lines offering different parts at different cost levels. I’ve personally never heard of the block you speak of, but that doesn’t mean anything. All I ever hear about is Dart. I’ve always wondered why there isn’t more options out there. I can say I’ve seen many Dart blocks handle some serious power and abuse. That’s the only reason I’d buy one. I’ve seen it with my own eyes what they can handle. Not because of people opinions on forums. There are a lot of knowledgeable people on here who swear by Dart as well. I’ll take a professional machinist advice over my opinions. The Dart block has to be a quality piece, there’s a reason why it’s the most used aftermarket block.
I will say this. To be honest you’re not doing yourself, or the product you’re trying to show us, by going about it the way you are. Screw the people who don’t wanna heat it and post positive stuff about your product instead. All this other nonsense just makes everyone want to ignore your advice. Just a thought.
 
21 - 40 of 64 Posts
Top